Femtosecond Fiber Lasers

C-Fiber Femtosecond Erbium Laser

Lasers & Detectors Femtosecond Fiber Lasers C-Fiber Femtosecond Eribum Laser

Menlo Systems’ fiber-based femtosecond laser sources integrate the latest achievements in fiber technology into easy-to-use products. Menlo Systems’ unique figure 9® design results in reproducible and long-term stable operation. It is based on the well-established nonlinear optical loop mirror (NOLM) mode locking mechanism. Both oscillator and amplifier use polarization maintaining (PM) fiber components only, ensuring excellent stability and low-noise operation. The laser is maintenance free, user installed and ready to use at the press of a single button. Customize your laser with the available options to match the requirements of your application.

  • High Stability
  • Low Amplitude and Phase Noise
  • All-PM Solution
  • Single Mode-Lock State
  • figure 9® Technology, Laser Output in Less than 60 Seconds
  • Repetition Rate 50-250 MHz
  • Excellent Price/Performance Ratio
  • Compact Design
 C-FiberC-Fiber High Power
Central Wavelength1560 nm ± 20 nm1560 nm ± 20 nm
Average Power >100 mW>500 mW
Pulse Energy >1.0 nJ >5.0 nJ
Pulse Width <90 fs<90 fs
Repetition Rate100 MHz (50-250 MHz with Vario)100 MHz (50-250 MHz with Vario)
Repetition Rate Instability<1 ppm over 20 hours at constant temperature<1 ppm over 20 hours at constant temperature
Timing Jitter <2 fs [rms, 10 kHz.. 10 MHz]<2 fs [rms, 10 kHz.. 10 MHz]
Output Portfiber-coupled (FC/APC)free space
Polarizationlinear, PM fiberlinear, s-polarized
Beam Height 102 mm

C-Fiber 780 Femtosecond Erbium Laser

Femtosecond Fiber Lasers C-Fiber 780 Femtosecond Erbium Laser

Menlo Systems’ fiber-based femtosecond laser sources integrate the latest achievments in fiber technology into easy-to-use products. Menlo Systems’ unique figure 9® design results in reproducible and long-term stable operation. It is based on the well-established nonlinear optical loop mirror (NOLM) mode locking mechanism. Both oscillator and amplifier use polarization maintaining (PM) fiber components only, ensuring excellent stability and low-noise operation. The subsequent second harmonic generation for the 780 nm is a highly efficient module for maximum performance.The laser is maintenance free, user installed and ready to use at the press of a single button. Customize your laser with the available options to match the requirements of your application.

  • High Stability
  • Low Amplitude and Phase Noise    
  • All-PM Solution
  • Single Mode-Lock State
  • figure 9® Technology, Laser Output in Less than 60 Seconds
  • Auxiliary Output at 1560 nm
  • Repetition Rate 50-250 MHz
  C-Fiber 780                    
C-Fiber 780 HIGH POWER
Central Wavelength 780 nm ± 10nm 780 nm ± 10nm
Average Power  >100 mW >250 mW
Pulse Energy  >1.0 nJ  >2.5 nJ
Pulse Width  <100 fs (<70 fs with FEMTOSCALE) <100 fs (<70 fs with FEMTOSCALE)
Repetition Rate* 100 MHz (50-250 MHz with VARIO) 100 MHz (50-250 MHz with VARIO)
Repetition Rate Instability  <1 ppm over 20 hours at constant temperature  <1 ppm over 20 hours at constant temperature
Timing Jitter  <2 fs [rms, 10 kHz.. 10 MHz] <2 fs [rms, 10 kHz.. 10 MHz]
Output Port  free space free space
Auxiliary Output Port**  free space, 1560 nm, >250 mW free space, 1560 nm, >500 mW
Additional Fiber-Coupled Seed Port  1 (up to 4 with MULTIBRANCH) 1 (up to 4 with MULTIBRANCH)
Polarization  linear, s-polarized linear, s-polarized
Beam Height  75 mm  75 mm

Orange Femtosecond Ytterbium Laser

Femtosecond Fiber Lasers Orange Femtosecond Ytterbium Laser

Menlo Systems’ femtosecond Yb fiber-based laser sources now offer more than 10 W in average power with a pulse duration of <200 fs. Based on our unique figure 9® design, the lasers offer reproducible and long-term stable operation. Both oscillator and amplifier use polarization maintaining (PM) fiber components only, ensuring excellent stability and low-noise operation. The second harmonic generation is a highly efficient module for maximum performance. The laser is maintenance free, user installed and ready to use at the press of a single button. Customize your laser with the available options to match the requirements of your application.

  • >10 W with <200 fs or >1W with <150fs
  • SHG 520 nm Option
  • High Stability
  • Low Amplitude and Phase Noise
  • Repetition Rate 50-250 MHz
  • Single Mode-Lock State
  • figure 9® Technology, Laser Output in Less than 60 Seconds
 orange
orange HIGH POWER
orange HIGH POWER 10
Central Wavelength1040 nm ± 10 nm1040 nm ± 10 nm1040 nm ± 10nm
Average Power>100 mW>1 W>10 W
Pulse Energy>1 nJ>10 nJ>100 nJ
Pulse Width*<150 fs<150 fs<200 fs
Repetition Rate**100 MHz (50-250 MHz with VARIO)100 MHz (50-250 MHz with VARIO)100 MHz (50-250 MHz with VARIO)
Repetition Rate Instability<1 ppm over 90 hours at constant temperature<1 ppm over 90 hours at constant temperature<1 ppm over 90 hours at constant temperature
Output Portfree spacefree spacefree space
Auxiliary Output Port optional optionaloptional
Additional Fiber-Coupled Seed Port 1 (up to 4 with MULTIBRANCH) 1 (up to 4 with MULTIBRANCH)1 (up to 4 with MULTIBRANCH)
Polarizationlinear, p-polarizedlinear, p-polarizedlinear, p-polarized
Beam Height95 mm95 mm95 mm
SECOND HARMONIC MODULE SHG 520 
Average Power >400 mW 
Pulse Width <150 fs 
Polarization linear, p-polarized 

 

YLMO-930 Femtosecond Fiber Laser

Femtosecond Fiber Lasers YLMO-930 Femtosecond Fibre Lase

Menlo Systems’ femtosecond fiber laser integrates the latest developments in fiber technology and incorporates these enhancements into an easy-to-use solution.

Our patented figure 9® technology delivers reliable and consistent mode-locking, which is ideally suited to ensure long-term stable operation in demanding environments. The YLMO-930 with its PM-fiber design guarantees excellent stability and consistent long-term performance. The YLMO-930 is engineered with life science applications in mind. The pulses can be prechirped to attain their shortest width within their intended target sample. The impeccable beam quality, both spatially and temporarily, ensures the most efficient use of the deposited energy for the targeted multiphoton process.

The installation of the laser system is as easy as it gets, taking only a few minutes. For ease of operation, the laser is switched on by the push of a single button. The maintenance free operation translates to a worry-free device that enables our customers to focus their time and resources on their actual application.

  • Compact: 10-50 times smaller than Ti:Sapphire lasers
  • Laser Output in less than 60 seconds after turn-on
  • Low Amplitude and Phase Noise
  • Adjustable Chirp Control (-60000 …0 fs2)
  • Low Amplitude and Phase Noise
  • Modulation Input (enable/disable): SMA Connector
  • Radio Frequency Output for Trigger/Synchronization: SMA Connector
  • Excellent Beam Quality (TEM 00, M²<1.2) and Beam Stability
  • Air Cooled – no Chiller
  • Low Power Consumption
  • Quality “Made in Germany”
 YLMO-930
Central Wavelength 930 nm ± 10 nm
Average Power >1 W
Pulse Energy>10 nJ
Bandwidth>10 nm
Pulse Width<140 fs, (typ. <120 fs)
Repetition Rate*100 MHz ± 1*
Output Portfreespace
2nd Synchronized Output Port (optional)1030 nm ± 10 nm, >1,5 W, <150 fs
2nd Fiber-Coupled Seed Port (optional)1030 nm ± 10 nm
Polarizationlinear, (>50:1)
Beam Diameter2 mm ± 0.5 mm
Beam Height56 mm**

ELMO Femtosecond Erbium Laser

Femtosecond Fiber Lasers ELMO Femtosecond Erbium Laser

Menlo Systems’ fiber-based femtosecond laser sources integrate the latest achievements in fiber technology into easy-to-use products. Menlo Systems’ unique figure 9® mode locking technology results in reproducible and long-term stable operation. The ELMO with its all-fiber design guarantees excellent stability and low-noise operation. As seed source for fiber amplifiers the oscillator is maintenance free, user installed and ready to use at the press of a single button. In short: An OEM laser engineered for 24/7 operation.

  • High Stability
  • Low Amplitude and Phase Noise
  • All-PM Solution
  • Single Mode-Lock State
  • Menlo figure 9® Technology, Laser Output in Less than 60 Seconds
  • Repetition Rate 50-100 MHz
  • Smallest Footprint, No additional laser driver required
 ELMO
ELMO HIGH POWER
Central Wavelength 1560 nm ± 30 nm1560 nm ± 30 nm
Average Power >1 mW ( up to 15 mW)*

>330 mW in free space version**

>100 mW in fiber coupled version (up to 200 mW)*

Pulse Widthchirped (<150 fs)*<90 fs
Output Portfiber-coupledfree space** or fiber-coupled
Polarizationlinear, PM fiberlinear, p-polarized*
Dispersion Management*dispersion can be factory set to achieve short pulses after 1-10 m of additional fiberdispersion can be factory set to achieve short pulses after 1-10 m of additional fiber
Repetition Rate*100 MHz (50-100 MHz with VARIO)100 MHz (50-100 MHz with VARIO)
2nd Fiber-Coupled Seed Portyesyes
2nd High Power Output Portavailable with MULTIBRANCHavailable with MULTIBRANCH

ELMO 780 Femtosecond Erbium Laser

Femtosecond Fiber Lasers ELMO 780 Femtosecond Erbium Laser

Menlo Systems’ fiber-based femtosecond laser sources integrate the latest achievements in fiber technology into easy-to-use products. Menlo Systems’ unique figure 9® mode locking technology results in reproducible and long-term stable operation. The ELMO with its all polarization maintaining fiber design guarantees excellent stability and low-noise operation. The ELMO 780 is perfectly suited for applications in terahertz generation, multiphoton excitation, lithography technology and 3D micro printing, as well as for seeding of amplifiers. With its modular concept and its compact frequency doubling module it is optimized for OEM integration and maximum versatility. All systems are maintenance free and engineered for 24/7 operation, ready to use at the press of a single button.

  • High Stability
  • Low Amplitude and Phase Noise
  • All-PM Solution
  • Single Mode-Lock State
  • Menlo figure 9® Technology, Laser Output in Less than 60 Seconds
  • Repetition Rate 50-100 MHz
  • Smallest Footprint, No additional laser driver required
 ELMO 780
ELMO 780 HIGH POWER
Central Wavelength 780 nm ± 10 nm780 nm ± 10 nm
Average Power >75 mW

>140 mW

Pulse Width<100 fs<100 fs
Output Portfree spacefree space
Polarizationlinear, p-polarized**linear, p-polarized**
Dispersion Managementpigtailed and versatile SHG module with up to 0.5 m optical fiber supply*pigtailed and versatile SHG module with up to 0.5 m optical fiber supply*
Repetition Rate*100 MHz (50-100 MHz with VARIO)100 MHz (50-100 MHz with VARIO)
Auxiliary Output Port at 1560 nmfiber coupled, 1560 nm, >180 mW, <90fs pulse width after up to 0.5 m external patch cord*** 
2nd Fiber-Coupled Seed Portyesyes
2nd High Power Output Portavailable with MULTIBRANCHavailable with MULTIBRANCH

YLMO Femtosecond Ytterbium Laser

Femtosecond Fiber Lasers YLMO Femtosecond Ytterbium Lase

Menlo Systems’ Ytterbium based femtosecond fiber laser oscillator integrates the latest developments in fiber technology and incorporates these enhancements into an easy-to-use product.

Our patented figure 9® technology delivers reliable and consistent mode-locking, which is ideally suited to ensure long-term stable operation. The PM-fiber design guarantees excellent stability and low noise, even in harsh environments with high fluctuations in temperature. As a seed source for amplifiers, the YLMO offers easy integration and maintenance-free operation, engineered for 24/7 operation.

  • High Stability
  • Low Amplitude and Phase Noise
  • All-PM Solution
  • Single Mode-Lock State
  • figure 9® Technology, Laser Output in Less than 60 Seconds
  • Repetition Rate 50-100 MHz
  • Smallest Footprint, One-box laser (no external control unit)
 YLMO
YLMO HIGH POWER
Central Wavelength 1030 nm ± 5 nm1030 nm ± 5 nm
Average Power >5 mW>200 mW
Pulse Energy >0.1 nJ>4 nJ
Bandwidth**>14 nm (others on request)  >14 nm (others on request)  
Pulse Width (FWHM)chirped, supporting <120 fschirped, supporting <140 fs
Repetition Rate***50 MHz (80 MHz or 100 MHz with VARIO)50 MHz (80 MHz or 100 MHz with VARIO)
Output PortSC/APC fiber patch cordSC/APC fiber mating sleeve
2nd Fiber-Coupled Seed Portoptionaloptional
Polarizationlinear, PM fiberlinear, PM fiber

YLMO-2W Femtosecond Ytterbium Laser

Femtosecond Fiber Lasers YLMO-2W Femtosecond Ytterbium Laser

Menlo Systems’ femtosecond fiber laser integrates the latest developments in fiber technology and incorporates these enhancements into an easy-to-use product.

Our patented figure 9® technology delivers reliable and consistent mode-locking, which is ideally suited to ensure long-term stable operation in demanding environments. The YLMO-2W with its PM-fiber design guarantees excellent stability and consistent long-term performance. The YLMO-2W is engineered with life science and multi-photon applications in mind. The pulses can be pre-chirped to attain their shortest width within their intended target sample. The impeccable beam quality, both spatially and temporarily, ensures the most efficient use of the deposited energy for the targeted multiphoton process.

The installation of the laser system is as easy as it gets, taking only a few minutes. For ease of operation, the laser is switched on by the push of a single button. The maintenance free operation guarantees a worry-free device that enables our customers to focus their time and resources on their actual application.

  • High Stability
  • Low Amplitude and Phase Noise
  • All-PM Solution
  • Single Mode-Lock State
  • figure 9® Technology, Laser Output in Less than 60 Seconds
  • Repetition Rate 100 MHz
  • Compact Laser Head
 YLMO-2W
YLMO-2W 520
Central Wavelength 1040 nm ± 5 nm520 nm ± 5 nm
Average Power >2 W>500 mW
Pulse Energy >20 nJ>5 nJ
Pulse Width<140 fs<150 fs
Repetition Rate*100 MHz ± 1 MHz100 MHz ± 1 MHz
Output Portfree space 
Polarizationp-pol. in free space (PER: typ. 23 dB)s- or p-pol. in free space (PER: typ. 23 dB)

For more products and information, click here.

Enquire Now

You may tick one or more
Scroll to Top