|Part No.||Square lens dimensions (mm)||Round lens diameter (mm)||Weight (Kg)||PDF Drawings|
|ALH-30×30-30||20 x 20 – 30 x 30||10.0 – 30.0||0.06|
|ALH-60×60-60||40 x 40 – 60 x 60||30.0 – 60.0||0.15|
|ALH-120×120-120||70 x 70 – 120 x 120||60.0 – 120.0||0.40|
* Adjustable elastic clamping, loading, and unloading easily and gripping firmly.
* The spring-loaded at design gently holds the optics and ensure the optics would not be damaged by excessive force, two stainless rods provides a rigid and non-abrasive guide.
* V-shaped chuck with 360° rotation, with V-shaped base, can grip or cylindrical lenses of different thickness
|Part No.||Diameter (mm)||Length (mm)||Width (mm)||PDF Drawings|
Cross-Post Adapter is offered in three forms, side top support, holding type support, and 360° angle adjustable type rod clamps. These adapters are of a simple structure made up of a high-quality aluminium alloy with a black oxidized surface. While in use, insert the support rod into the hole and tighten the screws on the side to fasten it. Customization for different apertures, color, and sizes are available.
Iris diaphragms are available with/without mounting holes, scale, base, and motor. They have a mounting slot at the bottom for easy mounting and a measuring-scale on the outer plane to display roughly the diameter of the aperture. The aperture size is adjusted either manually or by using a motor and is almost a circle. The manual iris is installed using optical mounts whereas the motorized iris is installed on an optical-platform or flat panel easily. Applications include spot processing, spectral processing, light diffractions, and at other instants.
Optical Post is offered in four types like threaded at both ends, threaded head upside and threaded hole downside, threaded holes at both ends, and as a single thread. These optical posts are made of high-quality stainless steel and act like support rods and used along with cross-post adapters and then connected to other components. Different sizes can be customized.
Carrier supports the optical slide using rail to build a variety of coaxial system for an optical path. It has a rigid plastic headlock hand wheel locking firmly and different standard sizes of mounting holes. Optical Rail is easy to install on the optical flat bench, and a measuring-scale can be set on the rail to facilitate reading. Several translation tables are possible to use on the optical-rail. It is easy to remove the carrier/slider from the side without affecting other parts of the rail.
Lens Mounting Ring
|Part No.||Lens Diameter (mm)||Outer Diameter (mm)||Aperture (mm)||PDF Drawings|
Lens Mount is available in 2-Axis, 3-Axis, and mounting ring forms having various adjusting screw thread specifications and with or without locking ring. The lens mounts (2-Axis & 3-Axis) have different adjustment frames such as miniature, differential head adjustment type, and ordinary type with straight-top type, barrel type, and pressure ring type ways of fixing lens. The lens barrel type is versatile because it can choose different specifications of lens barrels on the same adjustment frame. The pressure ring type fixed lens is more stable and has a larger aperture than the lens barrel type and the straight top type is a more convenient way to fix. The lens mounting rings are round lens holders and have M6 threaded hole at the bottom of the frame, which installs on the mount rods, optical platforms, and flat plates. Customization options are available.
Optics Mounts comes in 2d (translation), 3d (translation), 4d (2d translation + 2d angle) and 5d (3d translation + 2d angle) adjustment frames with different specifications of thread screw. They also have a locking mechanism to lock the movement adjustment and can be used with the mounting pad. The fine thread adjusting screw has better durability and is suitable for applications with high repeatability and heavy load. The thread adjusting screw has a better resolution and is suitable for uses in labs and industrial research. Other features like locking ring, mounting pad, different apertures are available upon request.
Polarized Holder A
Polarized Holder B
The Polarized Holder is used to install the polarizing optics with a lock screw design and a scale on the outer ring, which can read a minimum angle rotation of 0.1°. The 2d polarized holder utilizes thread adjusting screw depending on the need. Different sizes and additional features such as locking ring and mounting base are provided upon request.
|Part No.||Length (mm)||Height (mm)||Width (mm)||PDF Drawings|
* 90° Bracket and adapters
* Hole patterns is compatible and fit to various applications
* Mainly used to shift units combined into two-dimensional or three-dimensional orthogonal systems can also be other adjustments orthogonal planes
* Two orthogonal surface precision machining, to ensure perpendicularity requirements
* Multiple installation holes design versatility
The Rod Clamp includes a vertical pole and mounting surface. First, fix the work object to the installation surface, loosen the lock button to relax the holding device to drag the work object at the desired height, and tighten it. Special requirements such as height, holder type, rack & pinion, rod material can be customized.
Rotational Post Holder is available in many varieties with the base or no base, pressure plate, fine-tuned (0.003mm resolution), M6 thread screw, and M6 threaded holes in the bottom. All post holders are precisely bored, providing full two-line contact, to minimize wobble. The precision bearing design provides smooth rotation to arbitrary directions. It enables access rod around the rod axis 360° rotation without changing the other location parameters. The specifications given by the customer are also customized.
Translation stage is available in 2 and 3-dimensional adjustments with mounting screw holes at the bottom. They also have different adjusting fine-screw thread specifications and guides (linear, cross-roller & round) for a smooth and stable movement depending on the load capacity. The fine thread adjusting screw has better durability and is suitable for applications with high repeatability and heavy load. The thread adjusting screw has a better resolution and is suitable for uses in labs and industrial research. Other features are available upon request.